Signed in as:
filler@godaddy.com
Signed in as:
filler@godaddy.com
Solid 3/4" T&G Non-Defected & Non-Trimmed Flooring. This Grade is Milled from 4/4 KD Rustic Grade Northern White Oak Lumber 8' to 16' Lengths with a Standard Relief on Bottom of Floor.
Our Rustic Grade is Non-Defected & Non-Trimmed Flooring. We run it down the moulder and leave all the trimming to be done by the customer. There is no limit for defects but we suggest adding 4-7% extra waste for defecting out holes and unsound knots. You can expect worm holes, open knots, end-splitting and other minor defects. There is very limited milling defects because we do not defect it, mostly the occasional saw marks on face where the board didn't fully plane out.
Lengths Range from 8 foot to 16 foot, however we try to stock mostly 10' and 12' packs of flooring.
We Run and Stock Below Widths:
3-1/4", 4", 5", 6", 7" and 8".
We Run to Order Below Widths:
9", 10", 11" & 11-7/8"
We ship lengths based on what is available and additional fees are added to cut down lengths in order to ship LTL on pallets up to 12' long.
Large Knots & Sap Streaks
Some Moulder / Planer Marks because boards have high volume of knots and make the planer skip a little
Some Open Knots are expected as the knots will break up as its processed in the moulder.
Some Open Knots or Knot Checking
Live Sawn & Cathedral Grain on many boards 7", 8" and wider. Live Sawn means a board will have Plain Sawn, Rift Sawn & Quarter Sawn all showing on the same board.
Solid 3/4" T&G defected to show character without any defects that need to be removed. This grade is milled from 4/4 KD #1c & #2c Appalachian White Oak Lumber. The lengths range 1' to 10' and sometimes 12' and packaged in nested bundles. This flooring has standard relief on bottom and all ends are end-matched T&G as well.
Our Character Grade is defected to show sound knots, mineral streaking, color variation, some minor worm holes and overall light character allowed in White Oak.
Lengths Range from 2 foot to 10 foot, End-Matched & Nested Bundles
We Run and Stock Below Widths:
4", 5", 6", 7” & 8”
We Run to Order Below Widths:
2-1/4”, 3-1/4”, 9", 10" & 11”
Color Variation and Sound Knots throughout
Color Variation with Sap Wood and Mixed Grain Pattern
Solid 3/4" T&G defected to remove character defects and create a Select Grade Floor. This grade is milled from 4/4 KD #1c Appalachian White Oak Lumber. The lengths range 1' to 10' and sometimes 12' and packaged in nested bundles. This flooring has standard relief on bottom and all ends are end-matched T&G as well.
Select Grade White Oak is free from knots, checking, open holes, heavy color variation or large mineral streaks. This grade is as close to NWFA Select Grade as possible while offering a 1' to 10' length floor with 4' average lengths.
Lengths Range from 1 foot to 10 foot, End-Matched & Nested Bundles
We Run and Stock Below Widths:
4", 5", 6", 7" & 8”
We Run to Order Below Widths:
2-1/4”, 3-1/4” & 9”
Very Clean & Knot Free
This is Select Rift & Quarter Sawn White Oak
Add a footnote if this applies to your business
Solid 3/4" T&G Mill Run Flooring of our Long Leaf Heavy New Heart Pine. This grade is milled from lumber consisting of the heart material from Old Growth Southern Yellow Pine, which we pull for Long Leaf. We do not defect out anything other than unusable boards with rot is removed.
Mill Run Old Growth New Heart Pine will have mostly tight grain and high heart content around 70% or better. Some boards will have very little knots and some will have heavy knots, but the overall knot content is lower than most new heart pine on the market.
Lengths Range from 4 foot to 16 foot and we try to stock 8', 10' and 12' packs for shipping LTL.
We Run and Stock Below Widths:
3-1/4", 5-1/4", 7-1/4" and 9"
We Run to Order Below Widths:
2-1/4", 2-1/2" & 11"
The occasional large knot but most knots are medium to small in size. Some loose grain boards but most boards are tighter grain with nice heart content
Solid 3/4" T&G Mill Run Flooring of our Long Leaf Heavy New Heart Pine. This grade is milled from lumber consisting of the heart material from Old Growth Southern Yellow Pine, which we pull for Long Leaf. We grade for the boards that have tighter grain and least amount of knots so as to have a higher grade. We limit this grade to just a few widths.
We take the widths we get the most of and we grade them to a Select Grade by removing the Character Grade Boards. We try to pull for boards that are tight grain, heart content over 75% and just a few knots.
Our grade also allows for us to pull both a Vertical Grain (VG) and Flat Sawn Option in these sizes we grade.
Lengths are offered in 2 foot to 10 foot lengths, End-Matched & Nested Bundles
Widths Offered in VG & Flat Sawn Options:
2-1/4", 2-1/2”, 3-1/4" & 5”
Select Grade will have some knots but they are mostly small and not as frequent as in the Character Grade or Mill Run Grade.
Solid 3/4" T&G Mill Run Flooring of our New Heart Pine that was graded down when creating our Select Grade. This grade is milled from lumber consisting of the heart material from Old Growth Southern Yellow Pine, which this will typically consist of a mix of Long Leaf, Loblolly, Slash & Pitch Pine. We do not defect out anything other than unusable boards with rot is removed.
This will be boards with loose to medium grain, heavier knot volume, larger knots, and typically only 50%-75% Heart range.
Lengths are offered in 2 foot to 10 foot lengths, End-Matched & Nested Bundles
Widths Offered:
2-1/4", 2-1/2”, 3-1/4" & 5”
We typically will make a Mixed Grain from Live Sawn, VG and Flat Sawn culled for heavy knots and looser grain that goes into the Character.
Add a footnote if this applies to your business
Products We Manufacture in North GA
3/4" x Any Width 2” to 12”
Sawn: Standard Live Sawn or Vertical Grain / Quarter Sawn
Grades:
Rustic - 3” to 8”+
Oily - 3” to 6”+
Classic - 2” to 10”+
Classic Plus - 2” to 10”+
Select - 2” to 8”+
Premium - 2” to 8”+
Appearance Options: Dirty Top; Hit&Miss / Saw Marks; & Planed Face
Typically Run T&G but options available
3/4” or 5/8” x Random Width Options
Widths: Standard 4”-8”; Wide 7”-11”; Custom Fixed Width up to 12” or Narrow Plank 2”-5”
Appearance Options: Dirty Top; Hit&Miss/Saw Marks; or Planed Face
Milling Options: T&G; Shiplap; Bottom & Sides Square; Bottom Only Planed
3/4” or 5/8” x Random Width Options
Widths: Standard 4”-8”; Wide 7”-11”; Custom Fixed Width up to 12” or Narrow Plank 2”-5”
Appearance Options: Dirty Top; Hit&Miss/Saw Marks; or Planed Face
Milling Options: T&G; Shiplap; Bottom & Sides Square; Bottom Only Planed
Solid Unfinished T&G Flooring
3/4" x 5 1/4", 7 1/4", 8 3/4" & 10 7/8"
4' to 16' lengths
Loose Piece Pallets
3/4" x 2-1/4”, 3-1/4”, 5-1/4”, 7-1/4” or 9”
#2/Character - 8’ & Longer
Prime/Select - 4’ to 12’+
Typically Sold Non ET or EM
EM = End-Matched (Available)
ET = End-Trimmed (Available)
Nested Bundles Option on EM
Additional Options/Profiles:
- V-Groove
- Shiplap
- Nickel Gap T&G
- V-Bead
- Center Bead
- Etc
3/4" x 5", 6", 7", 8", 9”, 10" & 11”
Rustic - 4’ to 12'+ Non ET
Heavy Character - 1’ to 10’+ ET
Light Character - 1’ to 10’+ EM
Select - 1' to 10'+ EM
EM = End-Matched
ET = End-Trimmed
Nested Bundles Option on EM
3/4" x 5" or RW 4” to 8”
Rustic - 4’ to 12'+ Non ET
Heavy Character - 1’ to 10’+ ET
Light Character - 1’ to 10’+ EM
Select - 1' to 10'+ EM
EM = End-Matched
ET = End-Trimmed
Nested Bundles Option on EM
3/4" x 5" or RW 4” to 8”
Rustic - 4’ to 12'+ Non ET
Heavy Character - 1’ to 10’+ ET
Light Character - 1’ to 10’+ EM
Select - 1' to 10'+ EM
EM = End-Matched
ET = End-Trimmed
Nested Bundles Option on EM
3/4" x 5" or RW 4” to 8”
Rustic - 4’ to 12'+ Non ET
Heavy Character - 1’ to 10’+ ET
Light Character - 1’ to 10’+ EM
Select - 1' to 10'+ EM
EM = End-Matched
ET = End-Trimmed
Nested Bundles Option on EM
Solid Unfinished T&G Flooring
3/4" x RWL from RWL KD Lumber
1' to 10' lengths Non End-Matched
Domestic & Exotic Options
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Select, #1 common, #2 common & Utility Grade
Lengths 1’ - 7’ or 1’ - 8’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Select, #1 common, #2 common & Utility Grade
Lengths 1’ - 7’ or 1’ - 8’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Select, #1 common, #2 common & Utility Grade
Lengths 1’ - 7’ or 1’ - 8’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Select, #1 common, #2 common & Utility Grade
Steamed or Unsteamed
Lengths 1’ - 7’ or 1’ - 8’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Select, #1 common, #2 common & Utility Grade
Lengths 1’ - 7’ or 1’ - 8’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Clear Mixed, Select, #1 common & #2 common
Lengths 1’ - 7’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Clear Mixed, Select, #1 common & #2 common
Lengths 1’ - 7’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Clear Mixed, Select, #1 common & #2 common
Lengths 1’ - 7’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Clear Mixed, Select, #1 common & #2 common
Lengths 1’ - 7’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Clear Mixed, Select, #1 common & #2 common
Lengths 1’ - 7’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Clear Mixed, Select, #1 common & #2 common
Lengths 1’ - 7’
Nested Bundles
3/4” x 2-1/4”, 3-1/4”, 4” & 5”
Clear Mixed, Select, #1 common & #2 common
Lengths 1’ - 7’
Nested Bundles
3/4” x 5”
Clear Mixed or Select
Lengths 1’ - 7’
Nested Bundles
3/4” x 3-1/4” & 5”
Clear Mixed, Select & #1 common
Lengths 1’ - 7’
Nested Bundles
American Made & Imported
Engineered Prefinished T&G Flooring
*Call to check on current offerings
Engineered Prefinished & Unfinished T&G Flooring
1/2", 5/8" & 3/4" thickness
2mm, 3mm and 4mm wear layers
6 1/4", 7 1/2", 8" & 10" widths
1' to 6' & 1' to 8' lengths
We are able to source most species of Domestic, Exotic and Reclaimed Lumber to make options in 3/4", 5/8" and occasionally 1/2" all with a 5 mm veneer. Our unfinished engineered is made from sliced veneers and we can offer mill run only for most, but can grade some of the more popular items.
Engineered Prefinished T&G Flooring 9/16" x 4-1/2" with 3.5 mm wear layer and 1-1/2' to 6' lengths
Products we manufacture or represent a manufacture
Solid Prefinished T&G Flooring
3/4" x 5-1/8" x 1'-7'
Handscraped or Wire Brushed
Stains: Amber, Chestnut or Smoke
Added Effects: White Wash over Chestnut
Add a description about this item
Add a description about this item
Add a description about this item
This is only a small sample of what we offer!
Copyright © 2019 Morris Hardwood Distribution - All Rights Reserved.
Request Samples via Email